darkplanets
Mar 12, 02:14 PM
While I am not a nuclear engineer, I do have a fair amount of knowledge in the area, so with that in mind I can personally say that this will NOT become another Chernobyl situation. Again though as a disclaimer, this is not my career.
With that said, the BWR should be fine. What we saw earlier was the steam blowing apart the structure-- this just means that they didn't do their job in relieving the pressure. The core should be intact, and the reports state that the housing is still in place. When the control rods are inserted into the core, the rods will not melt down, however heat WILL still be produced. In this case, steam. Steam voids moderate fewer neutrons, causing the power level inside the reactor to lower. Furthermore, there should be safety overpressure valves... not sure why these didn't work; they may not be there due to the age of the plant.
To quote wikipedia about BWR safety:
Because of this effect in BWRs, operating components and safety systems are designed to ensure that no credible scenario can cause a pressure and power increase that exceeds the systems' capability to quickly shutdown the reactor before damage to the fuel or to components containing the reactor coolant can occur. In the limiting case of an ATWS (Anticipated Transient Without Scram) derangement, high neutron power levels (~ 200%) can occur for less than a second, after which actuation of SRVs will cause the pressure to rapidly drop off. Neutronic power will fall to far below nominal power (the range of 30% with the cessation of circulation, and thus, void clearance) even before ARI or SLCS actuation occurs. Thermal power will be barely affected.
In the event of a contingency that disables all of the safety systems, each reactor is surrounded by a containment building consisting of 1.2–2.4 m (4–8 ft) of steel-reinforced, pre-stressed concrete designed to seal off the reactor from the environment.
Again; BWR =/= graphite moderated reactor. Why does no one get this?! Everyone will be fine.
Two more bones of contention (which will give you my perspective):
-I personally believe the linear no threshold model is crap, even with the adjustment factor
-I also personally advocate the use of thorium... there's many benefits, melt-down control being one of them (because of MSR)... also although there's still fabrication issues, thorium can be used in existing LWRs. There is also proposed designs where the thorium has to actively be fed into the core, providing a great shutoff mechanism. The only con to this is the fact that thorium is more radioactive than uranium, so it's potentially more dangerous. I think the pros outweigh the cons.
Do you have a link for this? I'd like to read about it. I would think a system setup to automatically scram when power is lost would be the ideal.
Sure! It's really rather cool. (No pun intended)
For starters here (http://en.wikipedia.org/wiki/Boiling_Water_Reactor_Safety_Systems) is the current safety systems that are supposed to be in all BWR, however since this one is from the 80's, it's really hit or miss-- I can't answer that.
New reactor designs have these systems in place-- for example the Westinghouse AP 1000's. (here (http://www.ap1000.westinghousenuclear.com/ap1000_safety_psrs.html))
A general link about passive safety here (http://en.wikipedia.org/wiki/Passive_nuclear_safety).
Basically though, the idea is that human intervention, mechanical or otherwise, is always the weak point in nuclear safety. Instead of relying upon mechanical or man-controlled means, these safety measures employ the laws of physics and thermodynamics, which I hope are always working :D. Many of these systems rely on heat sensitive plugs connected to tanks to flood the chamber or coolant systems via gravity.
With that said, the BWR should be fine. What we saw earlier was the steam blowing apart the structure-- this just means that they didn't do their job in relieving the pressure. The core should be intact, and the reports state that the housing is still in place. When the control rods are inserted into the core, the rods will not melt down, however heat WILL still be produced. In this case, steam. Steam voids moderate fewer neutrons, causing the power level inside the reactor to lower. Furthermore, there should be safety overpressure valves... not sure why these didn't work; they may not be there due to the age of the plant.
To quote wikipedia about BWR safety:
Because of this effect in BWRs, operating components and safety systems are designed to ensure that no credible scenario can cause a pressure and power increase that exceeds the systems' capability to quickly shutdown the reactor before damage to the fuel or to components containing the reactor coolant can occur. In the limiting case of an ATWS (Anticipated Transient Without Scram) derangement, high neutron power levels (~ 200%) can occur for less than a second, after which actuation of SRVs will cause the pressure to rapidly drop off. Neutronic power will fall to far below nominal power (the range of 30% with the cessation of circulation, and thus, void clearance) even before ARI or SLCS actuation occurs. Thermal power will be barely affected.
In the event of a contingency that disables all of the safety systems, each reactor is surrounded by a containment building consisting of 1.2–2.4 m (4–8 ft) of steel-reinforced, pre-stressed concrete designed to seal off the reactor from the environment.
Again; BWR =/= graphite moderated reactor. Why does no one get this?! Everyone will be fine.
Two more bones of contention (which will give you my perspective):
-I personally believe the linear no threshold model is crap, even with the adjustment factor
-I also personally advocate the use of thorium... there's many benefits, melt-down control being one of them (because of MSR)... also although there's still fabrication issues, thorium can be used in existing LWRs. There is also proposed designs where the thorium has to actively be fed into the core, providing a great shutoff mechanism. The only con to this is the fact that thorium is more radioactive than uranium, so it's potentially more dangerous. I think the pros outweigh the cons.
Do you have a link for this? I'd like to read about it. I would think a system setup to automatically scram when power is lost would be the ideal.
Sure! It's really rather cool. (No pun intended)
For starters here (http://en.wikipedia.org/wiki/Boiling_Water_Reactor_Safety_Systems) is the current safety systems that are supposed to be in all BWR, however since this one is from the 80's, it's really hit or miss-- I can't answer that.
New reactor designs have these systems in place-- for example the Westinghouse AP 1000's. (here (http://www.ap1000.westinghousenuclear.com/ap1000_safety_psrs.html))
A general link about passive safety here (http://en.wikipedia.org/wiki/Passive_nuclear_safety).
Basically though, the idea is that human intervention, mechanical or otherwise, is always the weak point in nuclear safety. Instead of relying upon mechanical or man-controlled means, these safety measures employ the laws of physics and thermodynamics, which I hope are always working :D. Many of these systems rely on heat sensitive plugs connected to tanks to flood the chamber or coolant systems via gravity.
ct2k7
Apr 24, 12:43 PM
I am religious, however, I have to say there is some sort of motivation inside me to stick to my religion. I can't put my finger on what it is exactly, but there's something there. I'm always looking forward to something for some reason.
NathanMuir
Mar 13, 01:42 PM
Roscoe Wind Farm, which is the largest wind farm in the world, provides only 781.5 MW of power while Fukushima I for example, provides 4.7 GW (over six times as much). That wind farm takes 400km^2 so a wind farm that could replace the Fukushima I would take 2400km^2.
The largest solar power plant provides only 97 MW so even worse.
Hence why I said in 'larger part' and not 'exclusively'.
The largest solar power plant provides only 97 MW so even worse.
Hence why I said in 'larger part' and not 'exclusively'.
crees!
Aug 29, 12:41 PM
I have to say, I am APPALLED by the irresponsible attitude of some people on this forum (and probably the world). And do I care? Nah. Not one bit.
skunk
Mar 14, 07:38 PM
Did they attack your reading comprehension skills too?No, they didn't. They wouldn't dare. ;)
LagunaSol
Apr 28, 08:39 AM
I wonder if those people who complain about iPads not being included in smart phone market share will also complain that the iPad is included in pc sales market share?
The complaint isn't that iPads aren't being included in the smart phone market. The complaint is that there is a sole focus on smart phones when comparing Android vs. iOS market share when clearly the iPad and iPod Touch are very significant portions of the iOS platform.
This is not a "smart phone" platform battle. This is a new mobile computing platform battle. But since Android has no viable competitors to the iPad or iPhone Touch, people (Fandroids and analysts alike) conveniently like to leave those devices out of the equation.
The complaint isn't that iPads aren't being included in the smart phone market. The complaint is that there is a sole focus on smart phones when comparing Android vs. iOS market share when clearly the iPad and iPod Touch are very significant portions of the iOS platform.
This is not a "smart phone" platform battle. This is a new mobile computing platform battle. But since Android has no viable competitors to the iPad or iPhone Touch, people (Fandroids and analysts alike) conveniently like to leave those devices out of the equation.
Longey Nowze
May 5, 08:25 PM
I don't think it's an iPhone problem, I live outside the US and I have never had a dropped call. I have also used the iPhone in various countries including the US in Boston to be exact and I experienced no problems.
My husband has been an AT&T user for over a decade. He never experienced dropped calls until we started dating and he was talking to me (I'm on an iPhone, he is not). We often get disconnected 2-4 times per hour as we talk during our commutes home. We have different shifts, but take the same routes home and we get dropped no matter whether I'm stationary and he's moving, vice versa, or if we're both moving. This also happens when we're on business trips - both stationary - him at home, me in a hotel - and we will get disconnected. The recurring motif has been the iPhone. When I talk with others who have AT&T but no iPhone, they only get disconnected when they are talking w/ someone who has an iPhone. The worst issue is when I am communicating w/ someone iPhone to iPhone.
IF this wasn't the iPhone and otherwise so awesome, I would have switched a long time ago... and frankly, I'm still contemplating going to another phone when my contract is up - because the dropped calls are so aggravating.
Coworkers of mine that have switched from Blackberry on AT&T to iPhone have reported an inordinant number of disconnected calls since switching to the iPhone, even though it's the same carrier, same phone number and same physical location of use.
My "assumption" is that the iPhone software is making some errant call to the tower intermittently (whether too high/low power request or other issue) at which point, the tower drops the call.
While my experience with disconnects are sometimes random, there are some places that either I or my husband will be travelling by, when we will experience a disconnect - a place where he never gets disconnected while speaking to others w/o iPhones... places I never got disconnected before having an iPhone, either.
This may not be just an AT&T issue. It could be when you are a certain distance from a tower (lower power or significantly higher power?) and/or the phone is experiencing a push of data, that the interrupt happens.
This has largely been the elephant in the living room that AT&T and Apple has been ignoring. I have not only not seen an improvement, I've seen the situation get worse over time - whether this has to do w/ an increase of iPhone use faster than the towers can keep up, OR problems w/ iPhone OS updates or a combination of both - who knows. They need to fix this already.
My husband has been an AT&T user for over a decade. He never experienced dropped calls until we started dating and he was talking to me (I'm on an iPhone, he is not). We often get disconnected 2-4 times per hour as we talk during our commutes home. We have different shifts, but take the same routes home and we get dropped no matter whether I'm stationary and he's moving, vice versa, or if we're both moving. This also happens when we're on business trips - both stationary - him at home, me in a hotel - and we will get disconnected. The recurring motif has been the iPhone. When I talk with others who have AT&T but no iPhone, they only get disconnected when they are talking w/ someone who has an iPhone. The worst issue is when I am communicating w/ someone iPhone to iPhone.
IF this wasn't the iPhone and otherwise so awesome, I would have switched a long time ago... and frankly, I'm still contemplating going to another phone when my contract is up - because the dropped calls are so aggravating.
Coworkers of mine that have switched from Blackberry on AT&T to iPhone have reported an inordinant number of disconnected calls since switching to the iPhone, even though it's the same carrier, same phone number and same physical location of use.
My "assumption" is that the iPhone software is making some errant call to the tower intermittently (whether too high/low power request or other issue) at which point, the tower drops the call.
While my experience with disconnects are sometimes random, there are some places that either I or my husband will be travelling by, when we will experience a disconnect - a place where he never gets disconnected while speaking to others w/o iPhones... places I never got disconnected before having an iPhone, either.
This may not be just an AT&T issue. It could be when you are a certain distance from a tower (lower power or significantly higher power?) and/or the phone is experiencing a push of data, that the interrupt happens.
This has largely been the elephant in the living room that AT&T and Apple has been ignoring. I have not only not seen an improvement, I've seen the situation get worse over time - whether this has to do w/ an increase of iPhone use faster than the towers can keep up, OR problems w/ iPhone OS updates or a combination of both - who knows. They need to fix this already.
chirpie
Apr 13, 11:01 AM
I don't get the "imovie pro" comments. From the announcement, does it look like functionality is removed? What specifically would make this new version less pro than the previous.
And why are you assuming that FC doesn't include all that functionality, or that Color is no longer included? They didn't talk about the rest of the suite, but for a software package two months from release, it seems just as likely that the rest of the suite is still there but they just didn't want to talk about them yet. Or did they actually say that it's just one app now instead of a suite?
As a Logic user, I'm very interested to see if Soundtrack Pro is updated. It has a ton of potential but it has always been in horrible shape. Apple could kill it (and just beef up the audio in FC, but that seems like a bad strategy) or they could finally give it the attention it needs and finally make it an audio post app that can compete with Pro Tools. Hopefully Apple will have more info soon, will STP get an update, and if so will that update be available to Logic users (or will we have to wait until Logic X ships)?
In Cory's defense, he's presenting this as large concern that hasn't been addressed yet, not that he's ready to jump ship on the idea of FCP X.
And I share the concern. There's a LOT of unanswered questions around the suite. If Apple said "we're killing the rest of the suite" then I'd be p*ssed, but that doesn't sound likely at all.
So now we're left to wait and see what other details emerge.
A recap of a few things that made me happy... (from Larry's blog)
---------
* Rendering is now in the background and much faster because it harnesses the power of the GPU.
* The 4 GB memory limit is gone – FCP will use as much RAM as you have installed on your system.
* FCP X now uses all the processors on your system, not just one and a half.
In addition, a flock of new features were added:
* It supports editing video image sizes from standard definition up to 4K.
* It uses fewer tools from the Tool palette (which is no longer there, by the way) by making the cursor smarter. WHERE you click something determines WHAT you can do with it.
* A lot of existing features are jazzed up (linking and grouping are replaced by the much more elegant Clip Connection and Compound Clips)
* While new features like the magnetic timeline, permanent audio sync and auto-metadata generation are flat-out stunning.
-------------
And I for one LIKE the new UI. I was doing a favor for an aunt and was editing her son's graduation video and elected to do it in iMovie even though I have FCS3 and obviously while I didn't have all the functionality I was used too, I had plenty of moments where I was thinking "This part would have taken forever in FCP" or "I wish FCP was this slick looking."
This PREVIEW is a large step in the right direction. Let's see where things go from here.
And why are you assuming that FC doesn't include all that functionality, or that Color is no longer included? They didn't talk about the rest of the suite, but for a software package two months from release, it seems just as likely that the rest of the suite is still there but they just didn't want to talk about them yet. Or did they actually say that it's just one app now instead of a suite?
As a Logic user, I'm very interested to see if Soundtrack Pro is updated. It has a ton of potential but it has always been in horrible shape. Apple could kill it (and just beef up the audio in FC, but that seems like a bad strategy) or they could finally give it the attention it needs and finally make it an audio post app that can compete with Pro Tools. Hopefully Apple will have more info soon, will STP get an update, and if so will that update be available to Logic users (or will we have to wait until Logic X ships)?
In Cory's defense, he's presenting this as large concern that hasn't been addressed yet, not that he's ready to jump ship on the idea of FCP X.
And I share the concern. There's a LOT of unanswered questions around the suite. If Apple said "we're killing the rest of the suite" then I'd be p*ssed, but that doesn't sound likely at all.
So now we're left to wait and see what other details emerge.
A recap of a few things that made me happy... (from Larry's blog)
---------
* Rendering is now in the background and much faster because it harnesses the power of the GPU.
* The 4 GB memory limit is gone – FCP will use as much RAM as you have installed on your system.
* FCP X now uses all the processors on your system, not just one and a half.
In addition, a flock of new features were added:
* It supports editing video image sizes from standard definition up to 4K.
* It uses fewer tools from the Tool palette (which is no longer there, by the way) by making the cursor smarter. WHERE you click something determines WHAT you can do with it.
* A lot of existing features are jazzed up (linking and grouping are replaced by the much more elegant Clip Connection and Compound Clips)
* While new features like the magnetic timeline, permanent audio sync and auto-metadata generation are flat-out stunning.
-------------
And I for one LIKE the new UI. I was doing a favor for an aunt and was editing her son's graduation video and elected to do it in iMovie even though I have FCS3 and obviously while I didn't have all the functionality I was used too, I had plenty of moments where I was thinking "This part would have taken forever in FCP" or "I wish FCP was this slick looking."
This PREVIEW is a large step in the right direction. Let's see where things go from here.
LegendKillerUK
Mar 18, 09:22 AM
Please point that out in the contract, know it all.
Guess what, it isn't there.
Go look up the word Unlimited in the dictionary. Internalize and understand it. Come back here when you're done. Then come into a court room. Id like to sit back watch you (as I will eventually be watching AT&T) dance around the clear and concise definition of the word.
I've engaged in long, drawn out discussions with my legal pals about this very issue for several years, and they all agree it would completely impossible for AT&T to get out of court unscathed over this word "Unlimited"
Most of you people don't grasp the significance of the word in this case, which is not at all surprising given the crowd. (young and/or naive).
Most also think that because AT&T includes fine print in a contract, they can enforce it however they wish...which of course is a laughable fantasy to anyone who has sat through the first day of contract law.
y so mad?
I look forward to reading about your success against AT&T in the near future. Based on your immature responses I think we all have our answer on that.
Guess what, it isn't there.
Go look up the word Unlimited in the dictionary. Internalize and understand it. Come back here when you're done. Then come into a court room. Id like to sit back watch you (as I will eventually be watching AT&T) dance around the clear and concise definition of the word.
I've engaged in long, drawn out discussions with my legal pals about this very issue for several years, and they all agree it would completely impossible for AT&T to get out of court unscathed over this word "Unlimited"
Most of you people don't grasp the significance of the word in this case, which is not at all surprising given the crowd. (young and/or naive).
Most also think that because AT&T includes fine print in a contract, they can enforce it however they wish...which of course is a laughable fantasy to anyone who has sat through the first day of contract law.
y so mad?
I look forward to reading about your success against AT&T in the near future. Based on your immature responses I think we all have our answer on that.
skunk
Apr 23, 03:55 PM
Yay! It's .Andy! G'day!
rjjkp
May 31, 09:22 PM
:apple: How would you go about finding out if a phone or carrier service worked in a certain area if you didn't consult other people or credible sources? Wouldn't you have to make a decision based on 'Other Peoples Opinions' in order to find out? If you know Verizon service yields 0 bars in your area do you know this as a previous Verizon service customer, consult someone directly or take the 'Opinion' of the AT&T salesman?
Are you so inflexible as to believe no one in the universe has occasional connection problems? Do you live under an AT&T tower and never stray far from it? I'm looking to get an iPhone in 2 months and I hope it really is as reliable as you describe.
I have set up a contract with a provider BEFORE committing to a long iphone contract. I go into the said telephone store and set up some other non iphone device. Then return home and test its capability and signal strength. If it is acceptable I return the above phone for a full refund(I use it far less than the maximum 30 days. Then when the desired iphone is purchased I will expect the same performance.
Are you so inflexible as to believe no one in the universe has occasional connection problems? Do you live under an AT&T tower and never stray far from it? I'm looking to get an iPhone in 2 months and I hope it really is as reliable as you describe.
I have set up a contract with a provider BEFORE committing to a long iphone contract. I go into the said telephone store and set up some other non iphone device. Then return home and test its capability and signal strength. If it is acceptable I return the above phone for a full refund(I use it far less than the maximum 30 days. Then when the desired iphone is purchased I will expect the same performance.
spencers
Oct 7, 11:01 AM
Riiiiiiiiiiiiiiiiiiiiiiiight, a cupcake is going to take down iPhone?
Simm0nS777
Mar 18, 12:31 PM
Peoples stupidity ITT is hilarious.
I RARELY crack the 2GB level on my unlimited data plan. I usually tether about 2 days a week for a few hours. I work at a job with a ton of downtime. I spend that downtime browsing forums. If ATT takes away my tethering ability (no way in hell Im pay an extra $45 to tether) I will then have to spend that downtime watching netflix which is going to use A LOT more bandwidth than browsing forums on my laptop.
So those of you not bright enough to realize that for many they will be using MORE data need to use that head of yours a little more.
Its funny that in your guys minds that its better for someone to use 15GB a month watching netflix/streaming pandora etc. than it is for me to use 2GB tethering.
I RARELY crack the 2GB level on my unlimited data plan. I usually tether about 2 days a week for a few hours. I work at a job with a ton of downtime. I spend that downtime browsing forums. If ATT takes away my tethering ability (no way in hell Im pay an extra $45 to tether) I will then have to spend that downtime watching netflix which is going to use A LOT more bandwidth than browsing forums on my laptop.
So those of you not bright enough to realize that for many they will be using MORE data need to use that head of yours a little more.
Its funny that in your guys minds that its better for someone to use 15GB a month watching netflix/streaming pandora etc. than it is for me to use 2GB tethering.
Backtothemac
Oct 7, 01:54 PM
Originally posted by ddtlm
Backtothemac:
Does it annoy you to know that even in Photoshop (gasp!) those 25-year old ISA x86 machines kick the snot out of the latest and greatest Mac? Sure seems to.
2.8ghz, by the way.
Um,
Don't know what chart you were looking at, but with both processors being used, the 1.25 kicked the "snot" out of the PC's.
Backtothemac:
Does it annoy you to know that even in Photoshop (gasp!) those 25-year old ISA x86 machines kick the snot out of the latest and greatest Mac? Sure seems to.
2.8ghz, by the way.
Um,
Don't know what chart you were looking at, but with both processors being used, the 1.25 kicked the "snot" out of the PC's.
ddtlm
Oct 12, 07:52 PM
javajedi:
Sheesh, I have no idea how Java is defeating C... and those scores are still bizzarre. However PCUser did get 8.86 seconds on an Athlon 1533 with the right compiler flags. Looking at that, I wonder if the compiler flags are the cause here. Since this whole thing is essentially sqrt(), I wonder if the newer x86 chips are packing some strange special sqrt() assembly instruction that makes this huge difference. Hmmm. Otherwise I wonder how an Athlon at a little more than twice my clock speed (compared to the Xeon) can post results that are more than 4 times as fast.
Anyway this is it for me, since this is the weekend. I'll look for some x86 fast sqrt function Monday at work (I am pretty sure that such a thing exists, and if so it may be used in this test).
Sheesh, I have no idea how Java is defeating C... and those scores are still bizzarre. However PCUser did get 8.86 seconds on an Athlon 1533 with the right compiler flags. Looking at that, I wonder if the compiler flags are the cause here. Since this whole thing is essentially sqrt(), I wonder if the newer x86 chips are packing some strange special sqrt() assembly instruction that makes this huge difference. Hmmm. Otherwise I wonder how an Athlon at a little more than twice my clock speed (compared to the Xeon) can post results that are more than 4 times as fast.
Anyway this is it for me, since this is the weekend. I'll look for some x86 fast sqrt function Monday at work (I am pretty sure that such a thing exists, and if so it may be used in this test).
takao
Mar 13, 04:40 PM
I wouldn't be so smug if I was you. Looks like Austria uses over 60% imported oil and gas for electricity manufacture (http://ec.europa.eu/energy/energy_policy/doc/factsheets/mix/mix_at_en.pdf)... that Persian Gulf political turmoil must be pretty exciting for you guys, yes? Probably costly too.
You're also reliant on those nice people in Russia to keep their natural gas pipelines open (http://en.wikipedia.org/wiki/Russia–Ukraine_gas_disputes), aren't you... being land-locked and all.
you know what actually is costly ? the US policies in regard to Iran: it actually prevented developing the south iranian gas fields for use for european earth gas users since the US embargoes any company doing business with iran in excess of 10 million dollar ... and because of the US preventing alternative sources we are depending on Russia which had been a consistent supplier for more than half a century
nice distraction from your own argument ... where is the terror and war in which austria is involved because of the lack of nuclear energy ?
i would rather claim that nuclear power plants, construction of such powerplants, nuclear fuel production etc. bring forward a lot more international conflict
You're also reliant on those nice people in Russia to keep their natural gas pipelines open (http://en.wikipedia.org/wiki/Russia–Ukraine_gas_disputes), aren't you... being land-locked and all.
you know what actually is costly ? the US policies in regard to Iran: it actually prevented developing the south iranian gas fields for use for european earth gas users since the US embargoes any company doing business with iran in excess of 10 million dollar ... and because of the US preventing alternative sources we are depending on Russia which had been a consistent supplier for more than half a century
nice distraction from your own argument ... where is the terror and war in which austria is involved because of the lack of nuclear energy ?
i would rather claim that nuclear power plants, construction of such powerplants, nuclear fuel production etc. bring forward a lot more international conflict
calsci
May 5, 08:28 PM
they never seem to be on top of this issue.
NikeTalk
Apr 8, 10:35 PM
Real games aren't played on an iDevice. Say what you want, it's true at the moment. No need to look into the future..........cause you don't know what it holds. And if you do tell me if i'll be at work Monday please! (Gov worker)
SAIRUS
Mar 18, 11:15 AM
I'm a little split on this. My usage is under 5 gigs usually 99% of the time with legit Netflix streaming, pandora, and GPS usage.
Have I tethered before? I won't lie and say I haven't. I have a developer account and created an app to try it out.
That said, AT&T should upgrade their networks too. I pay for a service, and I believe they should serve me, not the other way around. If I obey the rules, don't clamp down to avoid upgrades.
Also anyone who says "change providers." I simply say, work doesn't allow me. Let alone, AT&T has the best coverage where I live. Just sucks that while having the fastest 3G is handicapped if you can't use it for a while. I also travel, so GSM is the best option for me.
I wish in America all frequencies between cell phone companies are standardized to the other foreign countries so all cell phone carriers would have to actually compete for your business.
Have I tethered before? I won't lie and say I haven't. I have a developer account and created an app to try it out.
That said, AT&T should upgrade their networks too. I pay for a service, and I believe they should serve me, not the other way around. If I obey the rules, don't clamp down to avoid upgrades.
Also anyone who says "change providers." I simply say, work doesn't allow me. Let alone, AT&T has the best coverage where I live. Just sucks that while having the fastest 3G is handicapped if you can't use it for a while. I also travel, so GSM is the best option for me.
I wish in America all frequencies between cell phone companies are standardized to the other foreign countries so all cell phone carriers would have to actually compete for your business.
MacCoaster
Oct 10, 04:03 PM
ddtlm:
Ah, thanks for clarifying.
Ah, thanks for clarifying.
fpnc
Mar 18, 06:10 PM
Okay, here are a few relevant portions from the iTunes Music Store Terms Of Service (TOS).
Security. You understand that the Service, and products purchased through the Service, such as sound recordings and related artwork (�Products�), include a security framework using technology that protects digital information and limits your usage of Products to certain usage rules established by Apple and its licensors (�Usage Rules�). You agree to comply with such Usage Rules, as further outlined below, and you agree not to violate or attempt to violate any security components. You agree not to attempt to, or assist another person to, circumvent, reverse-engineer, decompile, disassemble, or otherwise tamper with any of the security components related to such Usage Rules for any reason whatsoever. Usage Rules may be controlled and monitored by Apple for compliance purposes, and Apple reserves the right to enforce the Usage Rules with or without notice to you. You will not access the Service by any means other than through software that is provided by Apple for accessing the Service. You shall not access or attempt to access an Account that you are not authorized to access. You agree not to modify the software in any manner or form, or to use modified versions of the software, for any purposes including obtaining unauthorized access to the Service. Violations of system or network security may result in civil or criminal liability.
and
You agree that you will not attempt to, or encourage or assist any other person to, circumvent or modify any security technology or software that is part of the Service or used to administer the Usage Rules.
So, basically if you use PyMusique you are in violation of the TOS and because you need an iTunes account to even make use of PyMusique, Apple will know who is trying to violate the TOS.
Thus, as I said before, you'd have to be pretty stupid to even try and use this software.
Security. You understand that the Service, and products purchased through the Service, such as sound recordings and related artwork (�Products�), include a security framework using technology that protects digital information and limits your usage of Products to certain usage rules established by Apple and its licensors (�Usage Rules�). You agree to comply with such Usage Rules, as further outlined below, and you agree not to violate or attempt to violate any security components. You agree not to attempt to, or assist another person to, circumvent, reverse-engineer, decompile, disassemble, or otherwise tamper with any of the security components related to such Usage Rules for any reason whatsoever. Usage Rules may be controlled and monitored by Apple for compliance purposes, and Apple reserves the right to enforce the Usage Rules with or without notice to you. You will not access the Service by any means other than through software that is provided by Apple for accessing the Service. You shall not access or attempt to access an Account that you are not authorized to access. You agree not to modify the software in any manner or form, or to use modified versions of the software, for any purposes including obtaining unauthorized access to the Service. Violations of system or network security may result in civil or criminal liability.
and
You agree that you will not attempt to, or encourage or assist any other person to, circumvent or modify any security technology or software that is part of the Service or used to administer the Usage Rules.
So, basically if you use PyMusique you are in violation of the TOS and because you need an iTunes account to even make use of PyMusique, Apple will know who is trying to violate the TOS.
Thus, as I said before, you'd have to be pretty stupid to even try and use this software.
Don't panic
Mar 14, 04:14 PM
Trouble with this argument is that if everything goes completely tits-up with any other kind of power station, the results are indeed containable, but in the case of a nuclear power station, the results can be catastrophically bad. It is taking a worst case scenario to a whole different level.
oh, i am not arguing that, i am just saying that, given the circumstances, things so far has not been as bad as they could have.
of course things could still go south, but hopefully they won't
oh, i am not arguing that, i am just saying that, given the circumstances, things so far has not been as bad as they could have.
of course things could still go south, but hopefully they won't
alex_ant
Oct 9, 08:29 AM
Originally posted by Abercrombieboy
I don't understand you guys, you say that Windows XP is now stable and maybe you are right, and you say that PC's are faster and the hardware is the same quality for less money.
I am getting close to replacing my old iMac and I have always been a Mac person, but maybe you are right PC's are better now.
Nope, not better - faster. Nobody is saying Macs suck - they're saying Macs are slow. I paid $2300 for 550MHz of G4 molasses last year when I could have bought a PC notebook that kicked the pants off it performance-wise. But I don't regret my purchase decision. I would buy the same computer again today (well, maybe the iBook instead).
I don't understand you guys, you say that Windows XP is now stable and maybe you are right, and you say that PC's are faster and the hardware is the same quality for less money.
I am getting close to replacing my old iMac and I have always been a Mac person, but maybe you are right PC's are better now.
Nope, not better - faster. Nobody is saying Macs suck - they're saying Macs are slow. I paid $2300 for 550MHz of G4 molasses last year when I could have bought a PC notebook that kicked the pants off it performance-wise. But I don't regret my purchase decision. I would buy the same computer again today (well, maybe the iBook instead).
NathanMuir
Mar 13, 11:37 AM
The disaster in Japan is prompting this thread (obviously). I remember when nuclear power was described as the answer to all of our problems. I turned against Nuclear when I realized there was a waste problem, a tremendous problem that won't go away for over a thousand years. My understanding is that there might be a way to recycle nuclear waste, but the U.S. does not recycle nuclear fuel for "economic and security" reasons. I remember reading something about it, that used/recycled fuel could be used as a bomb. Then there are those ten thousand barrels of waste that nobody, especially Nevada do not want. If you look at France a substantial player in nuclear power, they have a "not in my backyard" problem. Throw in unpredictable events such as tsunamis, earthquakes, and terrorist events and nuclear does not seem all that wonderful to me.
Counter views?
Japans main problem, at this time, seems to be that someone thought it was a good idea to build the plants on the Pacific Rim (Yes, I am well aware that the West Coast of the United States lies on the Pacific Rim). A majority of the problems Japan faces currently appear to stem from the earthquake and the fact that the plants were dated and not built to withstand the magnitude of the quake (they were built to within a 7.5 quake, no?).
Counter views?
Japans main problem, at this time, seems to be that someone thought it was a good idea to build the plants on the Pacific Rim (Yes, I am well aware that the West Coast of the United States lies on the Pacific Rim). A majority of the problems Japan faces currently appear to stem from the earthquake and the fact that the plants were dated and not built to withstand the magnitude of the quake (they were built to within a 7.5 quake, no?).
0 komentar:
Posting Komentar